The scope of tunnel furnace:
It is suitable for the rapid drying of solvent-based inks and the drying of water-containing objects; it is widely used in printing, electronics, plastics, silicone, food, chemical and other industries.
Main performance and configuration of tunnel furnace:
1. Box-shaped split design, the length of the whole drying tunnel is 3m, and the drying section is divided into 1 section (2m is 1 section). Each section is divided into 9 heating pipes, and the distance of each heating pipe is 175mm. The drying tunnel is 500m wide, the feeding inlet of the drying tunnel is 0.5m, the width of the mesh belt is 500m, and the discharge opening is 0.5m.
2. The heating pipes are installed on the upper part and are installed in parallel.
3. Energy-saving power-saving tunnel furnace drying tunnel working space temperature Zui high can not be lower than: normal temperature -250 °C.
4. The transmission system adopts frequency conversion speed regulation transmission technology. Taiwan imported 0.75KW/1:60 gear box frequency conversion motor, and the conveying speed is adjustable from 0-25m/min.
5. According to the different drying items, in order to make the mesh belt can bear the large weight of zui, a rolling roller is placed every 300mm.
6. The belt material is imported Teflon mesh belt.
7. Energy-saving power-saving tunnel furnace heating zone net height of 200mm, each section of heating control is controlled by an independent temperature control detector. ± 3 ° C.
8. All the heating pipes are ceramic far-infrared lamps produced in Taiwan, and the temperature control precision is high.
9. Energy-saving power-saving tunnel furnace drying circuit power supply is three-phase 380V/50HZ, and the lamp voltage is 380V/50HZ.
